|
Product Details:
|
| Type: | BTS | Products Status: | Stock |
|---|---|---|---|
| Product Name: | HUAWEI CSHNA | Shipping Term: | DHL,Fedex,UPS,EMS,AIR |
| Condition: | Brand New | Warranty: | Six Month |
| High Light: | CSHNA,CSHNA Switching Timing Board,HUAWEI CSHNA SLB1 |
||
HUAWEI CSHNA SLB1 Hybrid system control switching and timing board
Product Description:
The functional version of the CSHNA is SLB1.
Application:
The CSHNA is the hybrid system control, switching, and timing board for the new-generation OptiX RTN 980. It provides STM-1, STM-4, and GE ports to convergence and schedule various types of services.
Figure 1 Application of CSHNA boards
NOTE:
E1 services shown in the preceding figure can be native E1 services or CES/ATM E1 services, and Ethernet services can be native Ethernet services or ETH PWE3 services.
Service boards shown in the preceding figure can be Ethernet interface boards, STM-1 interface boards, E1 interface boards, or Smart E1 processing boards.
Functions and Features:
The CSHNA provides 43 Gbit/s packet switching, full time-division cross-connection, system control and communication, and clock processing functions. It provides GE/FE ports, STM-1/4 ports, auxiliary ports, and management ports.
Table 1 lists the functions and features that the CSHNA supports.
Table 1 Functions and features that the CSHNA supports
| Function and Feature | Description | |
| Basic functions | Switching capacity | Provides a 43 Gbit/s packet switching capability. |
| Cross-connect capacity |
Higher order cross-connect capacity: 128x128 VC-4s Lower order cross-connect capacity: VC-12/VC-3 full time-division cross-connections equivalent to 32x32 VC-4s |
|
| System control and communication | Manages, monitors, and controls the running status of the IDU, and works as a communication service unit between the NMS and boards, thereby allowing the NMS to control and manage the NE. | |
| Clock | Clock source |
Provides the system clock and frame headers of service signals and overhead signals for the other boards by tracing any of the following clock sources: External clock SDH line clock PDH tributary clock Microwave link clock Synchronous Ethernet clock |
| Clock protection |
Supports the following clock protection schemes: Protection based on clock source priorities Protection by running the SSM protocol Protection by running the extended SSM protocol |
|
| Time synchronization |
Supports IEEE 1588v2 time synchronization. Supports ITU-T G.8275.1 time synchronization. Supports use of the AE 905S module as the clock source for time synchronization. |
|
| IEEE 1588 ACR | Supported | |
| External clock port | 1 | |
| External time port | 2 | |
| Data communication network (DCN) | Outband DCN | Supports a maximum of 24 DCCs. |
| Inband DCN | Supports the inband DCN function. The DCN bandwidth is configurable. | |
| Network management protocols | HWECC protocol | Supported |
| IP protocol | Supported | |
| L2 DCN | Supported | |
| SNMP protocol | Provides the SNMP Get and Set functions for managing devices. | |
| Protection | 1+1 hot backup | Supported |
| Anti-Theft function | Supported | |
| EPLA | Supported | |
| MPLS/PWE3 functions | Supported. See Table 2. | |
| QoS functions | Supported. See Table 3. | |
| Ethernet service functions | Supported. See Table 4. | |
| STM-1/4 service functions | Supported. See Table 5. | |
| Auxiliary ports and management ports | NMS port | 1 |
| NMS serial port | 1 | |
| NE cascade port | 1 | |
| Outdoor cabinet monitoring port |
1 The specifications of port comply with RS-485. |
|
| USB port |
1 Connects to a USB flash drive, which can be used to back up/restore databases and upgrade NE software. Houses a WLAN module to implement wireless NMS access. |
|
| MINI USB port | 1 | |
| External alarm port | 3 inputs + 1 output | |
| O&M | Warm reset and cold reset | Supported |
| In-service FPGA loading | Supported | |
| Queries of board manufacturing information | Supported | |
| Queries of board power consumption information | Supported | |
| Board temperature monitoring | Supported | |
| Board voltage monitoring | Supported | |
| Detection of indicators on the other boards | Supported | |
| Hot swapping | Supported | |
The packet switching unit of the CSHNA can work with its service interface unit or a service board to implement MPLS/PWE3 functions. Table 2 provides details about these functions.
If you are interested, please let us know the specific model. We will provide the best service and the best price!
Pr
Contact Person: Amy Lee
Tel: +8618573178646
