|
Product Details:
|
| Type: | BTS | Products Status: | Stock |
|---|---|---|---|
| Product Name: | HUAWEI AN5516-04 | Shipping Term: | DHL,Fedex,UPS,EMS,AIR |
| Condition: | Brand New | Warranty: | Six Month |
| Highlight: | AN5516 04 OLT GPON EPON,HUAWEI AN5516 04 OLT,AN5516 04 |
||
HUAWEI AN5516-04 OLT mini GPON EPON FTTH fiberhome power supply
Product Description:
The AN5516-04 has a strong adaptability to the environment and can be deployed quickly. In FTTx networks, the OLT is moved closer to the user side, which can save backbone optical cable resources. This solves the problem of a few users and long access distance, when FTTx services are applied in an area with a low population density.
AN5516-04 is 8-32PON ports GPON/EPON OLT, which is suitable for Small &Medium FTTx projects to offer triple play service. It complies with ITU-T G.984.x serial standards, provide GPON transmission with uplink/downlink bandwidth of 1.25/2.45 Gbit/s.
Deployed at the remote end, including the base stations (BSs) and outdoor environments
Connected to MxUs or ONTs and used in FTTB/C and FTTH scenarios
Connected to xDSL terminals and phones and used in the MSAN/DSLAM scenario
Chassis supports 2 Service Slots
One power slot, can supply with 2 ports DC redundancy
Two slot redundancy for main control board
Support GPON, EPON and P2P (Optical Access);xDSL and POTS(Copper Access)
Support GPON & EPON simultaneously
Support 8-GPON port interface card GC8B , 16-GPON port interface card GCOB
Support GPON split ration 1:128
Support GE uplink (HUSA :6GE HSUC:4*GE ) or 10GE uplink (HSUB:2*10GE+2GE)
Full front card and front lines design.
Support hot plug for all cards and PON modules.
Support redundancy error-check protection for services, controller and uplink cards.
End-to-end protection, uplink ports RSTP/LACP protection and downlink PON port millisecond level switch protection.
Green Energy
With high performance and low power consumption chip the overall power consumption is lower than the average industry level
8-level temperature control intelligent fan supporting free ports sleep mode and energy saving
AN5516-04 OLT configuration:
1 AN5516-04 Chassis
1 PWRD Power board (We also selling AC to DC(220V-48V) Power converter )
Or PWRA 220V AC
2 HUSA :6GE /HSUC:4*GE or 2 HSUB:2*10GE+2GE
1 GC8B 8Ports GPON baord with 8pcs SFP Module or EC8B 8Ports EPON Board with 8pcs SFP Module
1 GCOB 16Ports GPON baord with 16pcs SFP Module or ECOB 16Ports EPON Board with 16pcs SFP Module
1 FAN
Power cable & Accessories
Service boards:
8 ports 1G GPON board:GC8B
8 ports 1G EPON board:EC8B
16 ports 1G GPON board:GCOB
16 ports 1G EPON board:ECOB
Product Features:
The product is designed to help carriers build networks with larger bandwidths, higher speeds, and smarter connectivity to deliver better service experience.
Providing GPON, 10G GPON (including XG-PON and XGS-PON), P2PGE, and 10GE access, the AN5516-04 OLT supports deployment on FTTH,FTTD, FTTB, FTTC, and distributed converged cable access platform(D-CCAP) networks. This makes it applicable to home access,enterprise access, mobile backhaul, and Wi-Fi hotspot backhaul scenarios to aggregate all services on one fiber network.
The AN5516-04 OLT functions as a large-capacity aggregation device on the network to aggregate the traffic from ONTs, MDUs, and campus switches, thereby simplifying the network architecture and reducing the OPEX.
FTTH Network Application:
Supports the fiber to the home (FTTH) network application. It can be connected to the ONT in the user's house through the PON port or provide the P2P optical access service through the FE or GE port.
FTTB Network Application:
Supports the fiber to the building (FTTB) network application, and is connected to the ONU (MDU or ONT) that is deployed in the corridor through the PON port.
FTTC Network Application:
Supports the fiber to the curb (FTTC) network application, connected to the ONU that is deployed at the curb through the PON port, or connected to the DSLAM that is deployed at the curb through the GE optical port.
Centric Management for GE Remote Extended Subracks Networking
Leased Line Service (Enterprise Access)
Leased Line Service (Base Station Access)
Copper Access Network Application:
Supports multiple copper access modes such as ADSL2+, VDSL2, and SHDSL.
Voice Service Network Application:
Supports the voice service network application. The MA5800 can function as an AG (Access Gateway) in the softswitch network to provide the voice service and transmit the voice service to the IMS network. In addition, the MA5800X17 supports the TDM SHDSL access, which is applicable to reconstruction of the traditional voice network.
Technique Parameter:
| Characteristics | Descriptions | ||
| AN5516-01 | AN5516-06 | AN5516-04 | |
| Overall performance | |||
| Core switching capacity | 976G/bits | 400G/bits | 400G/bits |
| Backplane bus switching capacity | 3.25TG/bits | 432G/bits | 80G/bits |
| Transmission distance | 20KM | 20KM | 20KM |
| Splitting ratio | 1:64 | 1:64 | 1:64 |
| Core switching standby switchover time | <50ms | <50ms | <50ms |
| Uplink card standby switchover time | <50ms | <50ms | <50ms |
| Optical path protection switching time | <200ms | <200ms | <200ms |
| Operation temperature | 0°C~+50°C | ||
| DBA | |||
| Minimum bandwidth allocation granularity | ≤64kbit/s | ≤64kbit/s | ≤64kbit/s |
| Configurable minimum bandwidth | ≤256kbit/s | ≤256kbit/s | ≤256kbit/s |
| Precision | ±5% | ±5% | ±5% |
Product Display:
Order Guide:
(1)AC or DC power
(2)1.25G uplink or 10G uplink
(3)with what service board
(4)with what model of AC to DC(220V-48V) Power converter
Service boards:
8 ports 1G GPON board:GC8B
8 ports 1G EPON board:EC8B
16 ports 1G GPON board:GCOB
16 ports 1G EPON board:ECOB
Detailed images:
If you are interested, please let us know the specific model. We will provide the best service and the best price!
Pr
Contact Person: Amy Lee
Tel: +8618573178646
