| Property | Value |
| Output power | 6x60 W |
| MIMO | 2TX |
| Outdoor installation | Yes |
| SW supported technology | FDD-LTE |
| TX frequency range | 791-821 MHz |
| RX frequency range | 832-862 MHz |
| DL instantaneous bandwidth | 30 MHz |
| UL instantaneous bandwidth | 30 MHz |
| DL filter bandwidth | 30 MHz |
| UL filter bandwidth | 30 MHz |
| Interface | Label on the HW | Number of interfaces | Connector type | Additional info |
| Power connector | DC IN | 1 | 3-pole screw terminal | - |
| Antenna connector | ANT | 6 | 7/16 | - |
| RF output connector | RxO | 3 | QMA | - |
| Remote Electrical Tilt | RET | 1 | 8-pin circular | - |
| External Alarm Connection | EAC | 1 | MDR36 | - |
| Optical interface | OPT | 3 | SFP | 3 Gbps or 6 Gbps |
| ALD support via antenna ports | Value |
| AISG | ANT1, ANT3, ANT5, RET: AISG 2.0 |
| Legacy Siemens equipment | No |
| CWA (for non-AISG installations) | No |
| Voltage | ANT1, ANT3, ANT5: 25 V RET: 25 V |
| Power per port | 30 W |
| Property | Value |
| Nominal supply voltage | 48.0 V DC |
| Nominal input voltage range | -40.5 V DC to -57.0 V DC |
| Extended input voltage range |
-36.0 V DC to -40.5 V DC -57.0 V DC to -60.0 V DC |
| Mode | Configuration | Output power per carrier [W] |
Estimated power consumption [W] at 48VDC input at 25°C. Non-committed estimated values depend on the final product HW and SW optimization with +/- 10% margin. Average = (6h low hour load, 10h medium hour load and 8h busy hour load) / 24h |
||
|
Power consumption ETSI 202706 average load PRRH, static |
Power consumption ETSI 202706 busy hour load PBH RRH, static |
Power consumption 100% RF power load P100% RRH |
|||
| LTE | 1/1/1 2T2R | 20+20 | 466 | 533 | 665 |
| 1/1/1 2T2R | 40+40 | 606 | 733 | 985 | |
| 1/1/1 2T2R | 60+60 | 755 | 942 | 1326 | |
| Property | Value |
| Installation options |
• floor/stack installation • pole installation • wall installation • 19'' rack/cabinet |
| IP rating | IP65 |
| Related optional items |
Pole installation
• Flexi Mounting Kit for Floor, Wall and Pole (FMFA) • Flexi Pole Kit (FPKA) • Flexi Pole Kit (FPKC) • Flexi Module Casing (EMHx)
Floor/Wall installation • Flexi Mounting Kit for Floor, Wall and Pole (FMFA) • Flexi Module Casing (EMHx)
Outdoor 19'' rack • Flexi Module Casing (EMHx)
Cabinet/indoor 19''' rack • No optional items needed |
| Property | Value |
| Height | Core RFM: 115 mm (4.5 in.) |
| Depth |
Core RFM: 400 mm (15.7 in.) Without front covers: 422 mm (16.6 in.) With front covers: 560 mm (22.1 in.) |
| Width |
Core RFM: 420 mm (16.5 in.) Without front covers: 447 mm (17.6 in.) With front covers: 492 mm (19.4 in.) |
| Weight | 24 kg (52.9 lb) |
| Volume | 19.3 l |
| Property | Value |
| Maximum operational outdoor temperature (at constant high ambient temperature maximum output power might be limited) | +55°C (131°F) |
| Minimum operational temperature (including cold start) | -35°C (-31°F) |
Contact Person: Mrs. Amy Lee
Tel: +8618573178646
